10+ Powerful Ways To Handle “System Thread Exception Not Handled” Issue

Hello, welcome once again to Tech Parle. We are discussing a very good topic today and that is System Thread Exception Not Handled. So let us start the topic and discuss its solution.

When you click the power button on your computer tower or laptop, you should expect it to turn on and load normally.

Those who use Windows 10 PCs and do not understand what device drivers are or how to update device drivers.

When you switch on your computer for the first time, the infamous blue screen may show immediately, or it may take ten to fifteen seconds before the computer meets the issue that causes the infamous blue screen.

If you get the error code “system thread exception not handled,” your computer may get stuck in a reboot cycle.

This error number is often shown during computer startup and may prohibit you from using your computer completely.

This article will examine what this code means when it happens, why it happens, and five solutions to the issue.

What is the meaning of the system thread exception not handled error message?

 It’s a BSOD error message that’s being shown. It is conceivable that the SYSTEM_ THREAD EXCEPTION NOT HANDLED error is followed by the name of a defective system file, such as atikmdag.sys, nvlddmkm.sys, nwifi.sys, CMUDA.sys, or another similar file name in certain cases.

The stop code for a system thread exception not handled error is often 0x0000007E or 0x1000007E, depending on the version of Windows.

They indicate that an exception was thrown by a system thread that was not caught by the error handler. And there are a variety of exceptions. Also, check- Reboot and select proper boot device.

Get Data Back From The Crash Caused By System Thread Exception Not Handled

When a system thread exception not handled by windows 10 occurs and you are unable to boot your machine into Windows, you may restore your data by using MiniTool Partition Wizard.

Certainly, if your computer can boot into Windows and you discover that your data has been destroyed, you may attempt to restore it using this method.

If your computer won’t start up, follow this guide to learn how to restore your data.

System Thread Exception Not Handled
system thread exception not handled

Step 1: Activate The Bootable Media Option Of MiniTool Partition Wizard In The First Step.

  • Purchase MiniTool Partition Wizard and install it on a machine that is normally operating.
  • On the toolbar, choose Bootable Media from the drop-down menu

Step 2: Complete The Wizard’s Instructions And Choose A Media Destination.

  • USB Flash Drive (recommended): If you already have a USB flash drive connected to your computer, you may choose this option. The boot.iso file will be burned straight onto the USB drive, resulting in a bootable disc that is complete.
  • CD/DVD Writer: If the computer on which you are now working, as well as your computer, all support CD/DVD recording, you may choose this option.
  • ISO File: Selecting this option will create a boot.iso file on your computer’s hard drive. However, you should burn it to a USB flash drive,canIflater on, to create a bootable disc in its entirety.

Step 3: Configure The Firmware So That The Machine Will Boot From The Disc Containing The Boot.iso File That Has Been Burned.

  • Insert the bootable disc into the machine that isn’t booting up properly.
  • To enter BIOS, just follow the tutorial that displays on the screen once the system has been powered on for the first time.
  • Removable devices, such as USB flash drives or CD-ROM drives, should be the first devices to boot. After that, restart the computer.

Step 4: Activate The Data Recovery Option In The Fourth Step.

  1. Continue to wait for a few seconds without doing any actions until the MiniTool Partition wizard opens automatically once the machine has been started up.
  2. To access the main interface, choose Partition & Disk Management from the drop-down menu.
  3. Select Data Recovery from the drop-down menu.

Please keep in mind that the drive letters given are somewhat different from the ones that were originally given in Windows.

For example, partition E is the same as the original partition C. You may validate them based on the size of the available area or by using the Explore function.

On the toolbar, choose Data Recovery from the drop-down menu.

Step 5: Select Logical Drive E (which corresponds to the real system partition) And Then Press Scan.

  • The scanning range may be limited by choosing file systems and file types from the drop-down menu in the Settings section.
  • Select a partition for data recovery scanning to be performed.

Step 6: Using The Built-In Tools, Locate The Misplaced Files.

  1. Path: It organizes files into folders based on their paths.
  2. Type: It organizes files into categories based on their file types.
  3. Show Lost Files: This option only shows the files that have been lost.
  4. Find: This feature enables you to locate lost files by entering a continuous portion of their file names into the search box.
  5. Filter: It enables you to locate the missing files by limiting down the file range based on filename/extension, file size, creation/modification date, and other criteria, such as the date the files were last modified.
  6. Preview: It enables you to see the contents of files that are less than 100 MB in size before they are saved. In addition, it supports 70 different file formats.
  7. Export Scan Result: This option enables you to save the scan result file to your computer. After that, you can use the Recovery Result – Load Manually function to load this file later on and recover the data contained inside it without having to run a second scan.

Step 7: Select The Files You Want To Save And Then Save Them To A Location Other Than The System Partition.

  • Locate the files that need to be retrieved and save them as soon as possible.
  • If your computer is capable of booting into Windows and you need to recover data, all you have to do is purchase MiniTool Partition Wizard and enable the Data Recovery function.

System Thread Exception Not Handled Windows 10

system thread exception not handled
system thread exception not handled

It is a common Windows 10 problem that occurs mostly as a consequence of an out-of-date or incompatible driver with the operating system.

Below we will demonstrate how to fix the system thread exception not handled’ error in windows 10

1. Start Your Computer In Safe Mode| System Thread Exception Not Handled Windows 10 Update

Using Safe Mode on their computer is the first step consumers should do before trying to resolve this problem.

There are many methods to go about this, depending on your preferences and whether or not you are able to boot your computer into the sign-in page. Here are a few examples:

  • Safe Mode may be accessed via the Settings menu.
  • Select Settings from the Start menu by pressing the Windows key + I.
  • Go to Update & Security, then Recovery then follows the on-screen instructions.
  • Under Advanced startup, choose Restart immediately from the drop-down menu.
  • The Choose an option screen should display once your computer has been restarted.
  • From here, choose to Troubleshoot > Advanced settings > Startup Settings from the drop-down menu.
  • Then choose Restart from the drop-down menu.

As soon as your computer restarts, click the F5 key to start your computer in Safe Mode with Networking.

Starting With The Sign-In Screen

  • Simply hold down the Shift key and press the Power button, followed by the Restart button to begin.
  • Steps 4, 5, and 6 from the preceding section should be followed now

Starting With A Blank Screen

The procedures below should be followed if you are unable to access the sign-in screen on your computer.

  • To turn off your device, press and hold the power button for ten seconds until it turns off.
  • To restart the computer, press the power button one more.
  • To restart your computer as soon as the manufacturer’s logo displays, push the power button for another 10 seconds after it has begun to boot.
  • To get your gadget up and running, press the power button.
  • In the event that everything is done properly, your machine will boot into the Windows Recovery Environment.
  • Steps 4, 5, and 6 from the first part should be followed.

2. Identifying Which Driver Is At Fault

Because the problem is most likely caused by a faulty driver, you may utilize the Windows Log to determine which driver is at fault.

To do this, just follow the instructions below:

  • To open the Run dialogue box, press Windows Key + R and enter in the window that appears.
  • Select System from the Windows Logs menu once you have navigated to it and expanded it.
  • To figure out which driver is causing the problem, look for a log with the name system thread exception not handled and click on it to open it.

Due to their reputation for causing this BSOD, the associated driver is often a display driver or a network driver.

3. Roll Back Or Update The Drivers As Needed.

Depending on which driver is causing the system thread exception not handled the issue, you may need to either update or reinstall the drivers that are connected with it.

If the driver has not been updated in a long time, upgrading the driver would probably resolve the issue.

Alternatively, if the driver has been updated lately, it may be preferable to roll back the driver or reinstall the new software.

Update Drivers In Windows 10: What You Need To Know| System Thread Exception Not Handled Windows 10 Update

system thread exception not handled
system thread exception not handled
  • To launch the Device Manager, press Windows Key + R and enter devmgmt.msc into the Run box.
  • Expand the menu by navigating to the relevant device and selecting it. For example, if the problem was caused by a display driver, you would need to open the Display adapters option in the Advanced menu.
  • Update the driver by selecting it from the context menu of the right-clicked driver.
  • Then, in the pop-up window that appears, choose the option to “Search automatically for updated driver software.”
  • After that, Windows will automatically search the internet for and install the most recent driver versions.

Rolling Back Drivers In Windows 10 Is A Simple Process.

Navigate to the driver in question by opening Device Manager and selecting it.

Expand the menu and right-click on the driver to start the installation process.

  1. Select Properties from the drop-down menu.
  2. Under the Driver tab, choose Roll Back Driver from the drop-down menu.
  3. Windows will automatically revert to the most recent version of the driver that was previously installed.

4. Rename The Faulty File To Anything Else.

Users should rename the file that was connected with the system thread exception that was not handled error after obtaining the file name from the system.

Windows will make a new copy of the file and reinstall it as a result of this action. The driver files are stored on the C: drive. Drivers for the Windows System32 folder

5. To Rename The File, Just Follow These Steps:

  • Open File Explorer and go to the directory C:WindowsSystem32Drivers.
  • Look for the motorist who has been impacted.
  • F2 should be pressed after you have clicked on it.
  • Replace the extension of the filename with the suffix.old.
  • Press the Enter key to restart your computer.

6. To Repair System Files, Use The SFC And DISM Utilities.

A strong set of utilities, System File Checker (SFC) and Disk Image Recovery (DISM), are accessible to any Windows user.

When used together, they are capable of identifying and correcting almost any system-related problem. They’re also very easy to put into action.

Because these procedures may change system files, please remember to create a system restore point before doing them.

How To Utilize DISM

system thread exception not handled
system thread exception not handled

As an administrator, open the Command Prompt.

  • To begin, type DISM /Online /Cleanup-Image /ScanHealth into the terminal and click Enter.
  • Allow Windows to finish its scanning procedure. Then, on the command line, type DISM /Online /Cleanup-image /RestoreHealth.
  • Windows will immediately resolve any problems identified during the scan.

How To Make Use Of SFC

  • Type cmd in the Start menu search box, then right-click on Command Prompt and choose Run as administrator from the context menu.
  • Enter the command SFC /scannow in the terminal.

It will take some time for Windows to detect and repair any damaged system files, so be patient.

6. Restore Your Computer’s System Using System Restore.

If the problem persists, you will have no choice but to resort to System Restore as a last-ditch effort to fix it.

System Restore is a function that allows you to restore Windows to a previous state when necessary.

These restore points are generated regularly, as well as when new software is installed. Alternatively, you may configure Windows to automatically generate a restore point once a day.

  • Type Control Panel into the Start menu search box and press Enter to bring up the Control Panel.
  • Recovery may be found by searching for it in the Control Panel’s search box and selecting it from the results.
  • Select Open System Restore from the drop-down menu.
  • Then click on Next and choose a restore point from the list that appears.

Finish by pressing the Finish button.

Conclusion

Now that you got the basic idea about System thread exception not handled so we suppose that you can fix it on your own

If you have any further doubt then do let us know in the comment box.

system thread exception not handled

Leave a Comment